The original wires of iPhone are all made of white TPE material. The biggest disadvantage of this kind of wire is that it is not resistant to wear and dirt, and it is particularly easy to break and has a short service life. Therefore, many third-party manufacturers have introduced braided charging wires, which can effectively extend the service life of the wires.
At present, we have been very rich in woven wire, although they are called woven wire but there will be differences, and today's introduction to the woven wire seems to be different from most of the other woven wire on the market, suspected to be on the market for new iPhone 12 original woven wire.
I. Product appearance
Looking directly at the product, this time we bring you the C to lightning fast charging braided wire which is suitable for Apple lightning interface. The overall appearance of the wire is white, which looks very clean and tidy without clutter.
In close-up of wire terminal head, the net tail connecting the terminal head and the wire body is in the form of direct connection, and the transition of lengthened net tail is not adopted.
It can be seen that the lightning terminal head of the wire adopts silver contacts, and the eight contacts are arranged in an orderly manner.
First look at the current market of the regular weaving line, the traditional weaving line is the direct tile arrangement of fiber threads weaving, such as the above black knitting line is the ordinary tile arrangement weaving. This type of weaving when wear or damage occurs, the fiber will appear loose phenomenon, the line will become very hairy.
Let's take a look at the fast filling braided yarn introduced today. The knitting material of the thread body does not adopt the ordinary direct laying method of the filament. Instead, the small filaments are first wound into a small strand, and then the double strand is divided into a white and a gray for tight arrangement and weaving. When the filament is twisted into two strands and then braided, the phenomenon of wear and loss can be greatly improved and the wear resistance is higher.
The end-to-end length of the wire is about 105cm.
The diameter of the wire is about 3.04mm.
1.Lightning terminal test
When selecting usb-c to lightning data cable, it is necessary to make sure whether the terminal of lightning head is original or not. If the terminal is not original, there will be many incompatibilities. If the non original terminal head is used for a long time, the mobile phone will appear a pop-up window that may not be compatible with the charging accessories, resulting in the failure to charge the mobile phone.
The chargerlab power-z mf001 tester can detect whether the lightning terminal head of the wire is the original one. If the lightning terminal head of the wire rod is inserted into the lightning mother port of the tester, it can be seen that the ASIC and PMU of the data line are original c94 components, with a score of 100 points.
2. Charging compatibility test
The power transmission of the wire is tested. The iPhone 11 Pro Max supports USB Pd / apple2.4a fast charging protocol. The cable is used with the PD charger to charge the iPhone 11 Pro max with the power of 8.98v 2.52a 22.68w. The 9V voltage position is successfully shaken to open the PD fast charging mode.
The iPhone 11 Pro supports USB Pd / apple2.4a fast charging protocol. It uses wire and PD charger to charge iPhone 11 pro, with the power of 9.01v 2.01a 18.18w. It successfully shakes the 9V voltage position and turns on the PD fast charging mode.
IPhone 11 supports USB Pd / apple2.4a fast charging protocol. It uses wire and PD charger to charge iPhone 11. The power is 9.01v 2.17a 19.57w. The power is 9.01v 2.17a 19.57w. The 9V voltage position is successfully shaken to open the PD fast charging mode.
The iPhone se2 supports USB Pd / apple2.4a fast charging protocol. It uses wire and PD charger to charge iPhone se2. The power is 9.06v 1.24a 11.28w. It successfully shakes the 9V voltage position and turns on the PD fast charging mode.
The iPad air 2 only supports apple2.4a fast charging protocol. It uses wire and PD charger to charge the iPad air 2. The power is 5.04v 2.43a 12.26w. The apple 2.4a fast charging protocol is successfully handshaked.
The ipad Mini 5 supports USB Pd / apple2.4a fast charging protocol. It uses wire and PD charger to charge the ipad Mini 5. The power is 15.06v 1.44a 21.79w. The 15V voltage gear is successfully shaken to open the fast charging mode of PD.
The iPad air 3 supports USB Pd / apple2.4a fast charging protocol. It uses wire and PD charger to charge the iPad air 3. The power is 15.02v 2.17a 32.72w. It successfully shakes the 15V voltage position and turns on the PD fast charging mode.
3. Wear resistance test
In order to test the wear resistance of the two kinds of wire rods, Xiaobian will match with pointed nose pliers to simulate the scene after long-term use of the wires to see the specific use changes of the two kinds of wires.
First of all, the use of tip pliers to simulate the daily use of wire grinding, the above wire is the use of fiber wire directly tile arrangement of the way to see the wear of wire braiding wire body.
In the experience
Next, take a look at the wear of the C to lightning wire which is twisted into two strands and then braided. The needle nose pliers are also used to simulate the wear of the wire body.
It can be seen that even
Summary of Charge Headline
The emergence of braided wire makes the service life of data line greatly extended, but many braided wires will appear obvious burr phenomenon after a long time of use. In fact, although they are all braided wires, there are also great differences among them.
Direct use of fiber tile and first twist the fiber into a strand, and then closely arranged. A natural and different degree of wear resistance between the two, and this white appearance of the C to Lightning wire is made of the latter's braided wire body, the wire body is also thicker than the straight flat wire body, which is the reason for the longer life of this braided wire body.
In addition, the cable is C to lightning fast charging braided wire, which can provide PD fast charging for iPhone 8 and apple devices with updated lightning interface. In the actual compatibility test, it can shake hands with PD fast charging, and no incompatibility is found.
Generally speaking, the wire supports PD high-power charging, and has a more wear-resistant braided wire body with such a wire in hand, There's no need to worry about wire damageIf iPhone 12 are equipped with such a fast-charging braid, there is no need to worry about the life of the charging line.