Home > News content

Is there any bragging about the official performance of AMD RX 6000? It was a surprise

via:驱动之家     time:2020/10/10 1:19:21     readed:535

At the same time of the launch of the Reebok 5000 series,Su Ma also took out an Rx 6000 graphics card(to be exact, it should be RX 6900), and revealed three running points data. It seems that it has basically caught up with RTX 3080. Is this really the case?

Techpowerup compared its own measured data with that publicized by AMD, and found unexpected findings.


According to AMD, with the core processor of 5 5900x 12 and the memory of 16 GB ddr4-3200, the RX 6000 can run out of "no man's land 3", "call of Duty: modern war" and "war machine 5" with 4K resolution and the highest image quality61FPS、88FPS、73FPSThe average frame rate of.

TPU will test the environment as close as possible to the AMD settings. Of course, the processor can not be the sharp dragon 9 5900x, but i9-9900k.


In land of no owners 3, RTX 2080 Ti ran 41.8fps, ahead of Rx 600045.9%RTX 3080 can run 70.3 FPS, leading RX 600015.2%

In war machine 5, RTX 2080 Ti scored 62.8fps, and Rx 6000 could take the lead16.2%RTX 308084.4 FPS is faster than RX 600015.6%

In modern warfare, the RTX 2080 Ti has a performance of 77.9fps, and the RX 6000 is faster than it13.0%However, TPU has no longer used the project and has no RTX 3080 score.

Of course, the data publicized by AMD must be obtained under the best conditions,RX 6000 average lead is about RTX 2080Ti 21%, even if excluded

on the other hand,The RX 6000 will certainly not be able to beat the RX 3080. At present, it is about 8% behind, and in fact, it may reach double digits.


The RX 6000's performance is much better than previously expected, perhaps because of the smell

Another show is about to begin


Reprint please indicate the source: fast technology

#AMD#Video card#RX 6000

China IT News APP

Download China IT News APP

Please rate this news

The average score will be displayed after you score.

Post comment

Do not see clearly? Click for a new code.

User comments