Anecdotal, Huawei Mate60 series will be released in September or October this year, positive hard just Apple's iPhone 15 series. At present, the information about the flagship new machine has been a lot of exposure and speculation on the network. Today, we will summarize and interpret the four major exposure points related to Huawei Mate60.

Two days ago, the well-known exposure blogger @digital chat station broke the news that Kirin chip is back. The word aroused thousands of waves, and netizens have expressed their expectation that Huawei Mate60 will be equipped with a new Kirin chip. After all, it has been exposed before that Huawei 5G mobile phones will be listed by the end of this year.

But then @digital chat station also revealed that the chip is indeed a mobile phone chip, but it is not a flagship platform. At present, it is still in the yield climbing stage, and the debut of the new chip needs to wait.

Why doesn't the Kirin chip return start with the flagship? In fact, Huawei hisilicon does not lack the design capability of flagship chips, but the problem is that the production of chips is a global process. Before Huawei was unable to produce chips, there was a large factor because of the shutdown of foundries, and some foreign cutting-edge process technology became a stumbling block.

The return of Kirin chips either means that sanctions are relaxed, or it means that domestic chip technology has broken through some barriers, but the former is unlikely at present. There are rumors that the return of Kirin chip will be foundry by SMIC, using its N+1 manufacturing process, which is destined to be difficult to rush high-end Kirin core in the short term.

In fact, this is not the first cooperation between Huawei and SMIC, which previously manufactured the Kirin 710A chip. The chip originally used TSMC's 12nm process, but in order to get rid of sanctions restrictions, Huawei later chose SMIC's 14nm.

Smic's N+1 process can be simply understood as a process to increase the density of transistors in an existing process. For example, if SMIC's 14nm or 10nm process is mature, then the performance of the chip can be close to 7nm through the N+1 process. Of course, the performance is only close to 7nm, and there is still some gap with the real 7nm.

There are also netizens who have carried out science popularization of this process, you can refer to it.

However, even with the N+1 process, the Kirin chip that SMIC can produce is difficult to compete with the current flagship chip. After all, the performance of the new Kirin chip may only be close to 7nm, but the current flagship chip is already mature 4nm.

Therefore, the chip of Huawei Mate60 series is also likely to use the 4G Snapdragon core chip provided by Qualcomm, and the model should be the second-generation Snapdragon 8. As for the new Kirin chip, the source said it may be used in the new generation of nova series models.

When it comes to the front camera, most Android phones now use a single-hole scheme, which has the advantage of small screen openings and little impact on visual senses, but facial recognition security is not high, and it is prone to light interference, and it cannot reach the payment level.

In this regard, Huawei Mate series has been insisting on 3D face recognition, but this new machine did not continue the fringe design, but used the "smart island" similar to the iPhone 14 Pro.

Of course, Huawei also has adaptation in the software, and it is rumored that HarmonyOS 4.0 has added capsule reminders and unfold animations in the status bar.

Perhaps some netizens will question whether Huawei Mate60 series is copying Apple. In my opinion, even if it is similar, there is no fault. After all, 3D face recognition has always been the main function of the Mate series, and the design of opening long holes on the side has also been used on the Mate40 Pro, and you can only put the middle if you want to change the design.

Further, it is impossible to cancel 3D facial recognition because of avoiding suspicion with Apple, and this design has already appeared on the Xiaomi Civi3 and Honor 90 Pro. Even if the 3D facial recognition is removed, the front opening will be changed to the same design as many Android models.

As Huawei's flagship model, the rear camera of the Mate60 series is naturally also a big point of view. But what is the specific configuration, what is the appearance, the exposure on the Internet has its own collocation and appearance. However, with the exposure of the Mate60 series back cover casting mold, the appearance of the new machine seems to be clear.

From the figure, Huawei's Mate60 series also uses the design of a mid-rear camera module, with a high probability of four shots, of which two large openings should be a main outsole camera, and the other is a telephoto lens (according to @digital chat station, it is an ultra-thin periscope head).

At present, the specific lens parameters are not sure, we can first take a look at the previous generation of Huawei Mate50 Pro ultra light variable image module, which is composed of 50 million pixel ultra light variable camera +13 million pixel ultra wide Angle camera +64 million pixel 3.5X hidden telephoto camera. The main camera is the outsole RYYB main camera sensor, equipped with 10-speed variable aperture technology, and the entire rear camera module is supported by Huawei XMAGE image technology.

In theory, Huawei Mate60 series will certainly continue to strengthen on this basis, in addition to the ultra-thin periscope head just mentioned, the main camera is not 1 inch outsole is also worth looking forward to.

However, in any case, from the exposure of the mobile phone protective case, the thickness of the rear camera should not be too thin.

Previously, there were a large number of Huawei Mate60 exposure maps on the Internet, but they were basically drawn by netizens or media according to the news they heard. So let's just have fun. There's no need to take it seriously.

According to the above exposure of the back cover casting mold, some users have also made a new rendering. Moreover, Huawei Mate60, Huawei Mate60 Pro, Huawei Mate60 RS Porsche design three models are available

In this way, it is also quite in line with the style of Huawei mobile phones.

The front panel has basically confirmed that there is a high probability that Huawei Mate60 is a front single hole, and Huawei Mate60 Pro is a similar "smart Island" opening. If these are closer to the truth, then it depends on how the new machine handles the details.

Write at the end

HarmonyOS 4.0 has been officially announced and will be released at the Huawei Developer Conference on August 4th at 14:30. The new system has come, will Huawei Mate60 series be far away? What do readers expect from the new machine? Feel free to discuss in the comments section

(The above pictures are from the Internet)